/testing/guestbin/swan-prep --x509
Preparing X.509 files
east #
 ipsec setup start
[ 00.00] registered KLIPS /proc/sys/net
[ 00.00] ipsec_3des_init(alg_type=15 alg_id=3 name=3des): ret=0
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=12 name=cbc(aes) keyminbits=128 keymaxbits=256, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=253 name=cbc(twofish) keyminbits=128 keymaxbits=256, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=252 name=cbc(serpent) keyminbits=128 keymaxbits=256, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=6 name=cbc(cast5) keyminbits=128 keymaxbits=128, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=3 name=cbc(des3_ede) keyminbits=192 keymaxbits=192, found(0)
[ 00.00] KLIPS: lookup for ciphername=cipher_null: not found 
[ 00.00] 
Redirecting to: systemctl start ipsec.service
[ 00.00] 
east #
 /testing/pluto/bin/wait-until-pluto-started
east #
 # this should succeed
east #
 ipsec auto --add modecfg-east-21
002 added connection description "modecfg-east-21"
east #
 # these should fail due to overlapping address pools
east #
 ipsec auto --add modecfg-east-20
023 ERROR: new addresspool 192.0.2.100-192.0.2.200 INEXACTLY OVERLAPS with existing one 192.0.2.1-192.0.2.200.
023 leftaddresspool clash
036 attempt to load incomplete connection
east #
 ipsec auto --add modecfg-road-east
023 ERROR: new addresspool 192.0.2.100-192.0.2.200 INEXACTLY OVERLAPS with existing one 192.0.2.1-192.0.2.200.
023 leftaddresspool clash
036 attempt to load incomplete connection
east #
 echo initdone
initdone
east #
 ipsec look
east NOW
0.0.0.0/0          -> 192.0.2.1/32       => tun0xIPIP@192.1.2.254 esp0xESPSPI@192.1.2.254
ipsec0->eth1 mtu=16260(9999)->1500
tun0xTUN#@192.1.2.254 IPIP: dir=out src=192.1.2.23 jiffies=0123456789  natencap=none natsport=0 natdport=0   refhim=0
esp0xSPISPI@192.1.2.254 ESP_AES_HMAC_SHA1: dir=out src=192.1.2.23 iv_bits=128bits iv=0xIVISFORRANDOM000IVISFORRANDOM000 ooowin=64  alen=160 aklen=160 eklen=128 jiffies=0123456789  natencap=nonesp natsport=4500 natdport=4500   refhim=0
esp0xSPISPI@192.1.2.23 ESP_AES_HMAC_SHA1: dir=in  src=192.1.2.254 iv_bits=128bits iv=0xIVISFORRANDOM000IVISFORRANDOM000 ooowin=64   alen=160 aklen=160 eklen=128 jiffies=0123456789  natencap=nonesp natsport=4500 natdport=4500   refhim=1
tun0xTUN#@192.1.2.23 IPIP: dir=in  src=192.1.2.254 policy=192.0.2.1/32->0.0.0.0/0 flags=0x8<> jiffies=0123456789  natencap=none natsport=0 natdport=0   refhim=1
ROUTING TABLES
default via 192.1.2.254 dev eth1 
169.254.0.0/16 dev eth0  scope link  metric 1002 
169.254.0.0/16 dev eth1  scope link  metric 1003 
169.254.0.0/16 dev eth2  scope link  metric 1004 
192.0.1.0/24 via 192.1.2.45 dev eth1 
192.0.2.0/24 dev eth0  proto kernel  scope link  src 192.0.2.254 
192.0.2.1 dev ipsec0  scope link 
192.1.2.0/24 dev eth1  proto kernel  scope link  src 192.1.2.23 
192.9.2.0/24 dev eth2  proto kernel  scope link  src 192.9.2.23 
NSS_CERTIFICATES
Certificate Nickname                                         Trust Attributes
                                                             SSL,S/MIME,JAR/XPI
east                                                         u,u,u
mainca                                                       ,,   
road                                                         P,,  
north                                                        P,,  
hashsha2                                                     P,,  
west                                                         P,,  
west-ec                                                      P,,  
east #
east #
 if [ -n "`ls /tmp/core* 2>/dev/null`" ]; then echo CORE FOUND; mv /tmp/core* OUTPUT/; fi
east #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi