east #
 TESTNAME=`basename $PWD`
east #
 export TESTNAME
east #
 /testing/guestbin/swan-prep --testname $TESTNAME  --hostname east --x509
swan-prep running on east for test xauth-pluto-15 with userland libreswan
Preparing X.509 NSS files
east #
 ipsec setup stop
Redirecting to: systemctl stop ipsec.service
east #
 PATH/libexec/ipsec/_stackmanager stop
east #
 rm -fr /var/run/pluto/pluto.pid
east #
 PATH/libexec/ipsec/_stackmanager start
[ 00.00] AVX instructions are not detected.
[ 00.00] AVX instructions are not detected.
[ 00.00] registered KLIPS /proc/sys/net
[ 00.00] ipsec_3des_init(alg_type=15 alg_id=3 name=3des): ret=0
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=12 name=cbc(aes) keyminbits=128 keymaxbits=256, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=253 name=cbc(twofish) keyminbits=128 keymaxbits=256, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=252 name=cbc(serpent) keyminbits=128 keymaxbits=256, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=6 name=cbc(cast5) keyminbits=128 keymaxbits=128, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=7 name=cbc(blowfish) keyminbits=96 keymaxbits=448, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=3 name=cbc(des3_ede) keyminbits=192 keymaxbits=192, found(0)
[ 00.00] 
east #
 ipsec setup start
east #
 /testing/pluto/bin/wait-until-pluto-started
east #
 ipsec auto --add modecfg-road-east
east #
 echo done.
done.
east #