east:~# TESTNAME=algo-pluto-08 east:~# source /testing/pluto/bin/eastlocal.sh east:~# ipsec setup start ipsec_setup: Starting Libreswan IPsec VERSION east:~# ipsec auto --add westnet-eastnet-esp-null-alg east:~# /testing/pluto/basic-pluto-01/eroutewait.sh trap east:~# east:~# ipsec look east NOW 0.0.0.0/0 -> 0.0.0.0/0 => %trap 192.0.2.0/24 -> 192.0.1.0/24 => tun0xIPIP@192.1.2.45 esp0xESPSPI@192.1.2.45 ipsec0->eth1 mtu=16260(9999)->1500 tun0xTUN#@192.1.2.45 IPIP: dir=out src=192.1.2.23 natencap=none natsport=0 natdport=0 esp0xKLIPSPIK@192.1.2.45 ESP_AES_HMAC_SHA1: dir=out src=192.1.2.23 iv_bits=128bits iv=0xIVISFORRANDOM000IVISFORRANDOM000 ooowin=64 alen=160 aklen=160 eklen=256 natencap=none natsport=0 natdport=0 esp0xKLIPSPIK@192.1.2.23 ESP_AES_HMAC_SHA1: dir=in src=192.1.2.45 iv_bits=128bits iv=0xIVISFORRANDOM000IVISFORRANDOM000 ooowin=64 alen=160 aklen=160 eklen=256 natencap=none natsport=0 natdport=0 tun0xTUN#@192.1.2.23 IPIP: dir=in src=192.1.2.45 policy=192.0.1.0/24->192.0.2.0/24 flags=0x8<> natencap=none natsport=0 natdport=0 ROUTING TABLE 192.1.2.0/24 dev eth1 proto kernel scope link src 192.1.2.23 192.1.2.0/24 dev ipsec0 proto kernel scope link src 192.1.2.23 192.0.1.0/24 dev ipsec0 scope link 0.0.0.0/1 via 192.1.2.254 dev ipsec0 128.0.0.0/1 via 192.1.2.254 dev ipsec0 default via 192.1.2.254 dev eth1