/testing/guestbin/swan-prep --userland strongswan
east #
 strongswan starter --debug-all
Starting strongSwan X.X.X IPsec [starter]...
Loading config setup
Loading conn 'westnet-eastnet-ikev2'
  left=192.1.2.45
  leftid=@west
  right=192.1.2.23
  rightid=@east
  rightsubnet=192.0.2.0/24
  leftsubnet=192.0.1.0/24
  authby=secret
  keyexchange=ikev2
  auto=add
  ike=3des-md5-modp2048
  esp=aes128-sha2_512
found netkey IPsec stack
east #
 echo "initdone"
initdone
east #
 if [ -f /var/run/pluto/pluto.pid ]; then ipsec look ; fi
east #
 if [ -f /var/run/charon.pid ]; then strongswan status ; fi
Security Associations (1 up, 0 connecting):
westnet-eastnet-ikev2[1]: ESTABLISHED XXX seconds ago, 192.1.2.23[east]...192.1.2.45[west]
westnet-eastnet-ikev2{1}:  INSTALLED, TUNNEL, ESP SPIs: SPISPI_i SPISPI_o
westnet-eastnet-ikev2{1}:   192.0.2.0/24 === 192.0.1.0/24 
east #
east #
 if [ -n "`ls /tmp/core* 2>/dev/null`" ]; then echo CORE FOUND; mv /tmp/core* OUTPUT/; fi
east #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi