# /etc/ipsec.conf - Libreswan IPsec configuration file

config setup
	# put the logs in /tmp for the UMLs, so that we can operate
	# without syslogd, which seems to break on UMLs
	plutostderrlog=/tmp/pluto.log
	plutorestartoncrash=false
	dumpdir=/tmp
	protostack=klips
	plutodebug=all

conn westnet-all
	also=west-east-base-id-nss
	also=west-east-base-ipv4
	also=westnet-ipv4
	rightsubnet=0.0.0.0/0

include	/testing/baseconfigs/all/etc/ipsec.d/ipsec.conf.common


conn orient1
	authby=secret
	left=%defaultroute
	leftnexthop=%defaultroute
	right=%any
	rightnexthop=%defaultroute

conn orient2
	authby=secret
	left=%defaultroute
	#leftnexthop=%defaultroute
	right=%any
	rightnexthop=%defaultroute

conn orient3
	authby=secret
	left=%defaultroute
	leftnexthop=%defaultroute
	right=%any
	#rightnexthop=%defaultroute

conn orient4
	authby=secret
	left=%defaultroute
	#leftnexthop=%defaultroute
	right=%any
	#rightnexthop=%defaultroute

conn orient5
	authby=secret
	left=192.1.2.45
	#leftnexthop=%defaultroute
	right=8.8.8.8
	rightnexthop=%defaultroute

conn orient6
	authby=secret
	left=192.1.2.45
	leftnexthop=%defaultroute
	right=8.8.8.8
	rightnexthop=%defaultroute

conn orient7
	authby=secret
	left=192.1.2.45
	leftnexthop=%defaultroute
	right=8.8.8.8
	#rightnexthop=%defaultroute

conn orient8
	authby=secret
	left=192.1.2.45
	#leftnexthop=%defaultroute
	right=8.8.8.8
	#rightnexthop=%defaultroute

conn orient9
	authby=secret
	left=%defaultroute
	leftnexthop=%defaultroute
	right=8.8.8.8
	rightnexthop=%defaultroute

conn orient10
	authby=secret
	left=%defaultroute
	#leftnexthop=%defaultroute
	right=8.8.8.8
	rightnexthop=%defaultroute

conn orient11
	authby=secret
	left=%defaultroute
	leftnexthop=%defaultroute
	right=8.8.8.8
	#rightnexthop=%defaultroute

conn orient12
	authby=secret
	left=%defaultroute
	#leftnexthop=%defaultroute
	right=8.8.8.8
	#rightnexthop=%defaultroute